|
|
Use of R-material in asphalt mixtures with highly modified binder (HiMA)
Christ, Roman ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
The subject of this diploma thesis is paid attention to the influence of different dosing of R-material containing unmodified asphalt on the properties of asphalt concrete for abrasive layers (AC011 +) bonded with polymer highly modified asphalt (binder type HiMA). The properties of asphalt mixtures will be evaluated by means of the stiffness modulus test and the test of low-temperature properties by a uniaxial tensile test.
|
|
|
Design of headstock of the deburring machine
Tatíček, Jiří ; Holub, Michal (referee) ; Omes, Jiří (advisor)
The aim of this thesis is design of deburring machine, focusing on the headstock, capable of aligning the front side and chamfering at the round bars. At the beginning is a short research design nodes, used in the construction of machine tools. As part of the work was done and the measurement of cutting forces to determine the load while standing. Work also includes a series of calculations to justify the use of selected components. The outcome of the work is also a 3D model.
|
|
| |
|
|
Sinumerik 840D sl. tools for programming of CNC machines
Mešina, Matej ; Kalivoda, Milan (referee) ; Polzer, Aleš (advisor)
The thesis deals with the design and production technology of the front hub for a mountain bike. The research focuses primarily on the various control systems of CNC machining apparatuses. The second chapter is devoted to the elemental differentiation of hubs, the concept of personal design of the hub, and the characteristics of the materials for its production and its verification using the FEM analysis. The third chapter deals with the design of a workpiece, instruments and the manufacturing process itself. The design of an NC program constructed in the SinuTrain 4.8. software is dealt with in the fourth chapter. The last part is devoted to the technical and economic evaluation of the proposed solution.
|
|
|
Sinumerik tools for programming of rotational machine part
Slavík, Daniel ; Sliwková, Petra (referee) ; Polzer, Aleš (advisor)
This diploma thesis deals with a manufacture of rotating mechanical component on CNC lathe machine with Sinumerik control system. At first the chosen component is briefly described and then NC program is created in Sinutrain Operate 4.5 system. Afterwards the program is verified by simulation. Within the diploma thesis a technological documentation is elaborated that contains a new technological course of manufacture and a manufacture drawing of the component. The final part of this thesis is focused on technical-economic evaluation of newly designed manufacture with verification of cutting conditions and required output of the CNC machine. The outcome of the thesis defines an hour rate of CNC lathe and price of component that regards to newly presented manufacture.
|
|
|
Machinable bioceramic foams prepared by gelcasting method
Šťastný, Přemysl ; Částková, Klára (referee) ; Trunec, Martin (advisor)
Diploma thesis is focused on development of method for preparation individualized bioscaffolds prepared by milling of HA foam prepared by gel casting method and consolidated via epoxy curing reaction. Diploma thesis continues in bachelor thesis Modern processing methods of porous bioceramics. Literature search is filled in the newest knowledge from the field of bioactivity enhancement of scaffolds. Experimental part of diploma thesis described development of system for individualized scaffold manufacturing from HA suspension preparation, preparation of ceramic blocks used as material for machining to final blocks machining. Pressure strength of foam were evaluated, too. Chosen samples were coated with calcium polyphosphate coating for biological response enhancement. Coated samples were given for in-vivo test to partner university in Beijing under the terms of project FP7-NMP-2013-EU-China: "Bioscaffolds"
|
|
|
Milling machine
Homola, Stanislav ; Vetiška, Jan (referee) ; Marada, Tomáš (advisor)
This goal of the diploma thesis is to design, to construct and write control program for CNC milling machine designed for machining aluminum, wood and plastic. Entire structure of machine is designed and made of steel. The main table consists of an aluminum plate and aluminum structural profiles. Spindle of milling machine is a high speed motor from ATAS a.s. company. Milling machine is controlled by the program made in TwinCAT environment from Beckhoff Automation GmbH & Co. KG.
|
|
|
Improvement of manufacturing technology of flange
Dvořák, Jakub ; Fiala, Zdeněk (referee) ; Jaroš, Aleš (advisor)
This diploma thesis focuses on improvement of the existing technology of the flange part in cooperation with the company Znojemské strojírny, s r.o. The theoretical part describes the technologies used in machining of the component. Subsequently, cutting materials and aluminum alloys are dealt with. A detailed analysis of the existing technology is performed in the practical part of the thesis followed by rationalization of the production process, which was carried out with respect to time and financial savings. A new technological procedure is developed after the improvement of the current production process. Finally, a technical-economic evaluation of the design improvement process is carried out.
|
|
|
Active Compensation of Tool Deflection
Zarboch, Jaromír ; Marek, Jiří (referee) ; Březina, Tomáš (advisor)
This paper deals with design of tool deflection compensation system for milling spindle C1, provided by company TOSHULIN, a.s. A simplified simulation model of the spindle supplemented by compensatory elements was built by using programs ANSYS, MD ADAMS, Matlab/Simulink. As action elements there were use three piezoactuators each controled by PID controler. Efficiency of this compensation system was verified based on performed simulations.
|
|
| |
guest ::
